| MIL-C-5541 |
Chemical Conversion Coatings on Aluminum & Aluminum Alloys |
| MPS 136-247 |
Q.C. Requirements of Deminerliazed Water |
| MPS 138-43 |
Application of Fluid Resistant Epoxy Primer |
| MPS 138-44 |
Application of Fluid Resistant Polyurethane Coatings |
| MPS 157-26 |
Application of CMS 565-10 Integral Fuel Tank Coating |
| BAPS 160-10 |
Chromic Acid Anodizing |
| MPS 160-20 |
Chemical Conversion Treatment of Aluminum Alloys |
| MPS 160-40 |
Conductive Chemical Conversion Coating Type 1 Only |
| MPS 161-07 |
Application of MIL-L-46010 Solid Film Lubricant |
| MPS 161-08 |
Application of MIL-L-81329 Solid Film Lubricant |
| BAPS 168-013 |
Hardness & Electrical Conductivity Testing of Metals |
| MPS 168-15 |
Stress Relief of Metals |
| MPS 176-2 |
Penetrant Inspection |
| MPS 176-4 |
Magnetic Particle Inspection |
| MPS 180-1 |
Alkaline Cleaning |
| BAPS 180-15 |
Passivation of Corrosion Resistant Steel |
| BAPS 180-30 |
Alkaline Etching of Aluminum Alloys |
| MPS 180-31 |
Acid Cleaning & Deoxidizing Aluminum Alloys |
| MPS 180-32 |
Acid Cleaning and Deoxidizing Aluminum and Aluminum Alloys |
| MIL-C-5541 |
Type 1A Only |
| PPS 20.03 |
Penetrant Inspection |
| PPS 31.02 |
Cleaning process for Aluminum Alloys |
| PPS 32.01 |
Alodine |
| PPS 32.03 |
Chromic Acid Anodizing |
| PPS 32.05 |
Sulfuric Acid Anodize, Type 2 |
| PPS 34.08 |
F19 Primer |
| LES 1004 |
Penetrant Inspection |
| LES 1047 |
Chemical Film |
| LES 1006 |
Magnetic Particle Inspection |
| LES 1045 |
Chromic Acid Anodize |
| LES 1079 |
Application of Fuel Resistant Epoxy Finish |
| LES 1323 |
Passivation of Corrosion Resistant Steel |
| LES 1016 |
Heat Treatment and Surface Harding of Steel |
